VESSEL releases on February 25, 2021 “Waist Tool Holder <TP series>”.

Since its launch, more than 500,000 pcs of the 220USB have been shipped. And we have received a comment from electricians, in particular, who use this product at a high rate, that the screwdriver drops from commercially available tool holders because of difference in the shapes, and that the 220USB is unexpectedly activated in such holder because the sliding switch is unintentionally ON.

Therefore, as a tool holder optimum for the 220USB, we will release 4 types of waist tool holder series, which were developed with the following basic concepts:

(1) Optimum size for storing the 220USB. (Of course, a normal screwdriver is also stored);

(2) Designed to prevent the bit sleeve of the 220USB from accidentally operating and dropping the bit;

(3) Breathable material that suppresses heat generation even when the 220USB is charged in the holder;

④ 2-way installation; You can put it through the belt, or you can hook it on the belt:

⑤ D-shaped ring to which a anti-drop cord can be attached; and

⑥ Unified design as a part of the 220USB series.

(* The concepts ③ and ④ do not apply to some products.)

 

Features

TPH-10：
*For 1pc x screwdriver + 2pcs x bit.
*2-way attachment: hook or belt,
*D-shaped ring convenient to attach an anti-drop wire or karabiner,
*60mm-width belt loop,
*Breathable mesh structure enabling to charge the 220USB remained in the holder.
*Diagonal notch for smooth pick-up and storage of the 220USB.

TPH-40：
*For 1pc x screwdriver + 2pcs x plier.
*2-way attachment: hook or belt.
*D-shaped ring convenient to attach an anti-drop wire or karabiner.
*60mm-width belt loop.
*Breathable mesh structure enabling to charge the 220USB remained in the holder.
*Diagonal notch for smooth pick-up and storage of the 220USB.

TPB-10：
*Can store parts and mobile phone.
*For 1pc x screwdriver + 3pcs x pen.
*155mm-width compact size.
*2-way attachment: hook or belt.
*D-shaped ring convenient to attach an anti-drop wire or karabiner.
*60mm-width belt loop.
*With card holder.

TPC-10：
*Stores the 220USB, bits, and the charger in a compact case.
*EVA molded cushion case reduces impact during storage.
*D-shaped ring for hanging with a karabiner.

 

Applications

TPH-10/TPH-40： For electrical work, interior work, equipment and OA equipment maintenance.
TPB-10： Electricity and equipment construction. For light work such as maintenance and inspection.
TPC-10： For storage in an assembly facilities, electric device maintenance (repair). Also recommended to DIY and hobby use.