SELECTION CHART <AIR NIPPERS>
･Air nipper blade
Selection chart <Sliding Air Nippers>>
| Category | Cutting Capability | Application model No.GT- | |||||
|---|---|---|---|---|---|---|---|
| Copper wire | Steel wire (Non-heat treated) |
Piano Wire (HV320 or below) |
Soft Plastic | Hard Plastic | Plastic Solderless terminals | ||
| N NS NR | 1.0 | 0.5 | 2.0 | NS2 / NS3 / N3 / NR3 | |||
| 1.0 | 0.5 | 2.0 | N5 / NS5 / NR5 | ||||
| 1.6 | 1.0 | 3.0 | 2.0 | N7 / NS7 / NR7 | |||
| 1.8 | 1.2 | 4.0 | 2.6 | N10 / NS10L / NR10L | |||
| 2.3 | 1.7 | 4.5 | 4.0 | N12 | |||
| 2.6 | 2.0 | 1.0 | 7.0 | 5.0 | N20 / NS20 / NR20 | ||
| 3.3 | 2.8 | 1.2 | 10.0 | 6.5 | 1.25/2.0 | N30 / NS30 / NR30 | |
| 5.5 | 4.5 | 2.0 | 12.0 | 6/5 | N50 / NR50 | ||
| With pressure booster | 2.6 | 1.6 | 5.0 | 4.0 | 1.25/2.0 | P-10L | |
| 3.0 | 2.2 | 8.0 | 6.0 | 2.0/5.5 | P-20 | ||
| 4.8 | 4.0 | 13.0 | 7.0 | -0.8 | P-30 | ||
| 6.5 | 5.5 | P-50 | |||||
･Blade
| Air nipper No.GT- | Application model | |
|---|---|---|
| N3 / NS2 / NS3 / NR3 | For Metal |    |
| For Plastic |   |
|
| N5 / NS5 / NR5 | For Metal |    |
| For Plastic |   |
|
| N7 / NS7 / NR7 | For Metal |    |
| For Plastic |    |
|
| N10 | For Metal |   |
| For Plastic |  |
|
| N10L / NS10L | For Metal |  |
| For Plastic |   |
|
| N12 | For Metal |   |
| For Plastic |  |
|
| N20 / NS20 / NR20 NB20(For Plastic) |
For Metal |     |
| For Plastic |                 |
|
| N30 / NS30 / NR30 NB30(For Plastic) |
For Metal |   |
| For Plastic |          |
|
| For Climping |  |
|
| N50 / NR50 | For Metal |   |
